Tortosa Area Forum - Print Page

Tortosa Area Forum
Help or Advice >> Help and Advice Wanted >> Steel fabricators http://www.tortosaforum.com/cgi-bin/yabb2/YaBB.pl?num=1182867578 Message started by Farway on Jun 26^th, 2007 at 4:19pm

Title: Steel fabricators
Post by Farway on Jun 26^th, 2007 at 4:19pm

Hi.
Looking for a local steel fabricator in and around Tortosa. Not looking for a guy that has a few pieces of 25x6 flat bar and a welder but a fabricating workshop. I know there is one on Roqettes road pas the feed merchant and then there is the massive steel retailer opposite the ferriers round-about (near mum's(!!) the lighting palace). I am looking at 152x152x37 kinda stuff.

Any suggestions would be appreciated.

Thanks

Title: Re: Steel fabricators
Post by Pondgirl on Jun 26^th, 2007 at 7:42pm

Ebre Metal on the Ravel de Crist to Roquetes road?

Title: Re: Steel fabricators
Post by Farway on Jun 27^th, 2007 at 3:09pm

Wherer is my bloody map.........

Title: Re: Steel fabricators
Post by Huw on Jul 8^th, 2007 at 5:20pm

If you are coming from the roundabout where the firestone is you go under the railway line then at the next roundabout take the first right, that takes you into a poligon, go further in and Ebremetal is in there, there are also a couple of others too in there. Basically go in anywhere that looks large and decent and ask, most people will fall over themselves to help and if they can't will tell you who will, one thing though do try to speak the language!!