Hi everyone, i'v got a problem with my plumbing, No! in the house. bought an Ariston Gas water heater, but instructions not in english. We have moderate pressure comeing into the house but when it gets to the heater there is not enough pressure to get the water nice and hot. Anyone know if there is a filter in the heater. The distance from the outside waterpipe to the heater is only a few feet. Tried an on-line pump but that did not work. any ideas.

thanks for the link, but it's not there.

Also, have you tried adjusting the flow rate and temperature settings with the knobs on the front (assuming it has them) ?

1.5 bar should be plenty.  If anything I'd reduce the flow rate setting.  What's the flow rate from the hot tap compared to the cold tap ?  The lower the flow rate, the higher the temperature.

Thanks guys, the flow rate from the cold tap is marginally better than the hot, think i need to check all the pipes to the heater to see if there are any filters, i took the one off the basin tap and there was muck in it. The heaters and pipework have only been on a couple of weeks. Now need to take the shower off the wall.

Thanks Bigyin,
Think i will leave them off altogether.

Hi Briand,
How did you guess, Yes we love it, or used to, getting a bit long in the tooth, but we hope to ski later in the year.
Still trying to sort my hot water out.

Sand and sediment in your water is OK if you are taking it with Whisky as those additives improve the taste.  You would never of course add water or anything else for that matter to single malt as those men of pending independence will have you strung up if they witness said event.    However they are allowed to freeze our favourite snack cover it in revolting batter and deep fry it......Ahhhh A Mars it isn't.